Vestel eCharger Home Plus 22 kW EVC04-AC22-T2P7, wall box, black

eCharger Home Plus 22 kW EVC04-AC22-T2P7, wall box The EVC04 generation of Vestel's eCharger wall boxes not only offers excellent value for money, but also some comfort functions that are not standard in this class. This includes e.g. B. the access protection and the release of charging processes by RFID or the integrated DC residual current detection. An interface for connecting an intelligent MID (optional accessory) for dynamic performance optimization within the house connection or a potential-free switch contact for external control of the charging process are standard. Type: wall box Color: Black EAN: 4024862119430 Manufacturer No.: 815471 Series: EVC04 Area of application: inside, outside Placement: Wall Mounted, Free Standing (Optional) Voltage: 400V Frequency: 50/60Hz Charging power: 22 kW Charging mode: IEC 61851-1, mode 3 Number of phases: 3 Charging current adjustable: Yes Charging current: 10 - 32 A Charging point(s): 1 (1x cable with type 2 connector) Charging point(s): cable length | 7 m Power consumption in standby mode: 3.5 watts Interface(s): RS485 Access security: RFID Protection mechanisms: DC residual current detection (RCD internal, I?n ? 6 mA) Display/Indication: LED ring (status display) Material: plastic, flame-retardant (housing) Degree of protection: IP54 Impact resistance: IK10 Protection class: I Ambient conditions: operating temperature (without direct sunlight) | -35 - 55? Ambient conditions: storage temperature | -40 - 80? Ambient conditions: relative humidity (non-condensing) | 5 - 95% Ambient conditions: Max. altitude (above sea level) | 4,000m Installation conditions: Required on site | Type A residual current circuit breaker Feature: switch contact output Funding by KFW: Prerequisite | IMPORTANT: The subsidy must be applied for BEFORE purchasing the charging station! Subsequent submission is unfortunately not possible! The prerequisite for the subsidy is that only electricity from renewable energies is used for the charging stations, e.g. directly from your own photovoltaic system or via an energy supplier. Detailed information on KfW funding can be found on the KfW website. Note: A qualified electrician is required for installation, repair or maintenance! This also takes care of reporting to the local grid operator/energy supplier. When installing a charging station with a charging capacity of more than 11 kW, it is also mandatory to obtain prior approval from the network operator/energy supplier. Additional information: Mandatory AC power cord: 5 x 6 mm2 ( Accessories: optional | MID energy meter 3P KL6934 (10126454), Stand EVC04 Black (10125901) Dimensions: Width: 315mm x Height: 460mm x Depth/Length: 135mm Weight: 10.5kg