Arctic Liquid Freezer II 240 A-RGB black + Co - ACFRE00099A

Liquid Freezer II 240 RGB 240mm, water cooling The Arctic Liquid Freezer II 240 RGB is a multi-compatible all-in-one water cooler with RGB lighting. The Liquid Freezer II RGB combines the efficient PWM pump of the Liquid Freezer II with RGB fans optimized for static pressure. In this way you can achieve a completely different aesthetic with extremely low volume and equally low temperatures. The water pump has reduced hum and increased efficiency. Like the other components, it is also PWM controlled. This results in a significantly lower noise level at low and typical load, but also a much lower power consumption of 0.8W idle, 2.3W under typical load and a maximum of 4.8W under full load for the entire AiO. Unlike most other all-in-one liquid cooling manufacturers, Arctic relies on 38 mm thick radiators with a high fin density. A larger amount of water can be used in the circuit and the cooling surface can be significantly increased. The fibre-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large housings and effectively prevents the cooling liquid from evaporating, so that you don't have to worry about refilling the compact water cooling system. Type: Water Cooling Color: Black EAN code: 4895213703208 Manufacturer part number: ACFRE00099A Type: Water Cooling Kit Suitable sockets: 1150, 1151, 1155, 1156, AM4, 2066, 1200 Fastening: screwed Loudness: 0.3 sones Equipment: LED lighting LED lighting: Yes, RGB header LED lighting: color | RGB Speed: 200 to 2,000 rpm Heat sink material: copper Fan Bearing: FDB - Fluid Dynamic Bearing Airflow: 48.8cfm Air Pressure: Up to 1.85mm/H2O Radiator size: 2x 120 mm Pump: speeds | 800 rpm, 2,000 rpm System: closed system Power connector: 4-pin PWM Voltage range: 12 volts Feature: High static pressure for improved cooling performance (1.85 mm H2O), extended speed range 200 - 2000 rpm. (1800 rpm on the radiator), low power consumption, less vibration and rubber buffers, improved durability, high-quality plain bearings, PWM for synchronous pump/fan control, RGB sharing for synchronous lighting Note: LEDs: 4-pin 12V-GRB connector with Y-splitter, controller specifications: signal input: 4-pin MB signal, signal output: 4-pin 12V-GRB x4 Accessories: available | including RGB controller Dimensions: Fan1 | Quantity: 2 pieces, width: 120 mm, height: 120 mm, depth: 25 mm Dimensions: Heatsink | Width: 120mm x Height: 38mm x Depth: 277mm Dimensions: Overall | Width: 120mm x Height: 63mm x Depth: 277mm